Backed by our sound expertise in the specific
industry, we are presenting wide gamut of aluminium filler wires, filler wires and metal filler wires that
are developed in compliance with international standards of quality
using industry grade raw material. Our product range can be put for
many applications by adding one or more alloys to increase the
strength. Adding different alloys also enhances the qualities that
make it suitable for diverse industrial purposes. Our aluminium filler wires, filler wires, and metal filler wires are also available in strips, powder, paste and also in
preformed rings and shapes.
Product Code
Composition %
AWS A5.10
Si
Fe
Cu
Mn
Zn
Al
Mg
Cr
NG-1B
0.25 max
0.40 max
0.05 - 0.20
0.05 max
.10 max
99 min
-
-
ER1100
ALFA NG - 1B is used for Welding of
Pure Aluminium and Aluminium constructions.
NG-21
4.5 - 6.0
0.80 max
0.30 max
0.05 max
.10 max
Rest
.05 max
-
ER4043
ALFA NG - 21 is used for Welding of
Aluminium - Silicon alloys with Si upto 6%.
NG-2
11.0-13.0
0.80 max
0.30 max
0.15 max
.20 max
Rest
.10 max
-
ER4047
ALFA NG - 2 is used for Welding of
Aluminium-Silicon Alloys with Si upto 12%
NG-6
0.25 max
0.40 max
0.10 max
0.05-0.20
.10 max
Rest
4.5 - 5.5
.05 - .20
ER5356
ALFA NG - 6 is used for Welding of
High Strength, Aluminium-Magnesium alloys with Mg upto 6%.Widely
used in Automobile and Marine Industry.
Available with us is an array of top grade fluxes, silver soldering fluxes, soldering fluxes that comply with various industrial standards making it suitable for
varied uses. Our qualitative range of fluxes consist of mild organic
acid or strong inorganic acid which promotes high speed cleaning of
metals with strong surface oxides. Being acknowledged for their
quality and complete reliability, our fluxes, silver soldering fluxes and soldering fluxes are generally used for
phosphorus/copper brazing, silver brazing, solder and aluminum. Our
qualified team enables us to provide our range in the following
technical specifications.
Product
Code
Applications
Remarks
SILFLUX
It is an all Purpose, low temperature flux for use
in brazing both ferrous and non-ferrous metals and alloys using
silver brazing filler metals. It begins to melt and dissolve oxides
at 340C & becomes fully molten at about 600C and provides
adequate protection upto 750C. Excellent in hot rodding operation
used to braze weld where the hot brazing rod is plunged into the dry
powder. Easy clean up in hot water.
Equivalent to Esab Rupatam A Flux
SILFLUX-A
Recommended for use in 650C-815C Excellent in hot
rodding operations. For application where a dry volatile flux is
required. Easy clean up.
Equivalent to Handy Dry Flux 6040
SILFLUX-B
The temperature range of thus flux is 600C-925C. It
is recommended for brazing tungsten & chromium carbides,
molybdenum alloys & high chromium stainless steels. It is useful
where local overheating may occur, as in fast induction heating.
available in powder & paste form.
Equivalent Handy Flux Type B-1
SILPASTE
It is general purpose, low temperature flux in paste
form which provides creamy smooth consistency and excellent
adhesion. It begins to melt & dissolve oxides at 320C, is fully
molten at 600C & it provides full protection upto 870C. It is
used for brazing all ferrous & non-ferrous alloys. Easy clean up
with hot water.
Equivalent to Handy Paste Flux.
BRAZOFLUX
It is used for brazing or fusion welding of various
ferrous & non-ferrous metals and alloys ( like cast iron, steel,
brass et.) using Cu-Zn (Brass) filler metals.
Equivalent to Esab Brazotectic Flux.
BRONZOFLUX
It is used for brazing various ferrous &
non-ferrous metals & alloys using Cu-Sn (Bronze) based filler
metals.