Indian Solder And Braze Alloys Private Limited
Navinmandi, Meerut, Uttar Pradesh
GST No. 09AAECI6011Q1Z8
Send E-mail
Call 0794267387880% Response Rate
Home  » Our Products » 

Flux Coated Rods


Pioneers in the industry, we offer flux coated silver brazing 40n rods alfa404fc, flux coated silver brazing 35% rods alfa208fc, flux coated rod nickel bronze rods alfa510fc, size 2.00mm, flux coated silver brazing 20% rods alfa202fc, flux coated brass brazing rods, size 2.50mm alfa501fc and flux coated silver brazing 43% rods alfa207fc from India.

  • +3
Get Best Quote

Approx. 39,952 / Kg Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Kg
Size1.60 mm, 2.00mm, 2.50 mm, 3.15 mm500 mm
BrandALFA
Tensile Shear Strength50 kg/mm2
Melting Point671 - 775 Degree C
Daimeter1.60 mm,2.00mm,2.50 mm,3.15 mm
Model40Fc 40N

ALFA-404FC is used for brazing carbide tip brazing. Similar to ALFA-405, but higher brazing temperature is required. It flows freely and does not contain cadmium.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 35,307 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength40 kg/mm2
Melting Point607 - 710 Degree C
Minimum Order Quantity1 Kg
Surface FinishingBare & Flux Coated
Diameter607 - 710 Degree C
Model208FC

ALFA - 208FC is free flowing and is suitable for general purpose work requiring higher brazing temperature. Its melting range is helpful where joint clearances are not uniform. Unless heating is rapid, care must be taken , that lower melting constituents do not seperate by liquation

Yes! I am Interested


  • +3
Get Best Quote

Approx. 1,019 / Kg Get Latest Price

Product Brochure
Product Details:
BrandALFA
Tensile Shear Strength54 kg/mm2
Melting Point890 - 920 Degree C
Surface finishingFlux Coated
Length Of Rod500mm
Model510
Diameter2.00mm

ALFA - 510FC is often used for brazing tungsten carbide. It is also used with steel, nickel and nickel based alloys. This filler metal is unsuitable for protective atmosphere furnace brazing. It is also known as "Nickel Bronze".

Yes! I am Interested


  • +3
Get Best Quote

Approx. 21,370 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength45 kg/mm2
Melting Point632 - 688 Degree C
Model202FC
Purity20%
Minimum Order Quantity1 Kg
Surface FinishingBare & Flux Coated

ALFA - 202FC is very versatile, high strength, free flowing and exhibits low melting points. It can be used to join a wide range of base metals besides being economical.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 1,019 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength40 kg/mm2
Melting Point875 - 895 Degree C
Model Name/Number501FC
Surface FinishingFlux Coated
ShapeRound
Daimeter2.00mm

ALFA - 501FC is used for brass brazing steels, malleable cast iron, copper, copper alloys with melting temperatures greater than 950 C, nickel and nickel alloys.It is also known as "Silicon Bronze"

Yes! I am Interested


  • +3
Get Best Quote

Approx. 42,740 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength42 kg/mm2
Melting Point615 - 620 Degree C
Surface FinishingBare & Flux Coated
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Model207FC
Minimum Order Quantity1 KG

ALFA - 207FC may be used in brazing operations, requiring a low temperature, quick and complete penetration and neat joints of high strength that needs little or no finishing. It is used where joints are closely fitted and where it is desired to employ a single alloy effective in wide range of applications. It may be used in brazing steel, copper, brass, gunmetal, tin bronzes, aluminium, manganese bronzes, copper nickel alloys and nickel silver.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 1,166 / Kg Get Latest Price

Product Brochure
Product Details:
BrandALFA
Tensile Shear Strength40 kg/mm2
Melting Point875 - 895 Degree C
Model501FC
Surface FinishingFlux Coated
Diameter1.60mm
Usage/ApplicationGeneral Fabrication
Length Of Rod500mm

ALFA - 501FC is used for brass brazing steels, malleable cast iron, copper, copper alloys with melting temperatures greater than 950 C, nickel and nickel alloys.It is also known as "Silicon Bronze".

Yes! I am Interested


  • +3
Get Best Quote

Approx. 1,044 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength40 kg/mm2
Melting Point875 - 895 Degree C
Model501FC 2.00mm
Diameter2.00mm
Surface FinishingFlux Coated
ShapeRound

ALFA - 501FC is used for brass brazing steels, malleable cast iron, copper, copper alloys with melting temperatures greater than 950 C, nickel and nickel alloys.It is also known as "Silicon Bronze".

Yes! I am Interested


  • +3
Get Best Quote

Approx. 30,661 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength38 kg/mm2
Melting Point607 - 710
Surface FinishingBare & Flux Coated
Minimum Order Quantity1 KG
Model Name/Number203
Purity30%
Daimeter1.60 mm,2.00mm,2.50 mm,3.15 mm

ALFA - 203FC is very versatile, high strength and is free flowing. It can be used to join a wide range of base materials.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 54,818 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60mm,2.00mm,2.50mm,3.15mmf
MaterialFlux Coated Silver Brazing Rods
Size500M
BrandALFA
Tensile Shear Strength48 kg/mm2
ColorAs per customer's requirement
Melting Point619 - 652 Degree C
Model Name/Number311SNFC
Purity56%

ALFA - 311Sn is a low melting filler metal and does not contain cadmium. It is ideal for furnace brazing. It is used by the dairy and food industry where cadmium free joints are required. This brazing alloy is less prone to cause stress cracking on stainless steel and some nickel alloys. After brazing it gives a closer match with whitish metals such as stainless steel.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 49,244 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength43 kg/mm2
Melting Point620 - 640 Degree C
Minimum Order Quantity1 KG
Surface FinishingFlux Coated
Model205FC
Diameter1.60 mm,2.00m,2.50 mm,3.15 mm

ALFA - 205FC is a general purpose alloy which has highest joint strength and also provides resistance to corrosion in chlorine, sulphur and steam environments.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 49,244 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength45 kg/mm2
Melting Point632 - 688 Degree C
Minimum Order Quantity1 KG
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Model405FC
Surface FinishingBare & Flux Coated

ALFA-405FC is particularly suitable for brazing carbide tool tips to tool shanks as it wets the carbide tool tip very satisfactorily. It has a wide wetting range, therefore, the solid and liquid portions do not tend to separate excessively. It is good filler metal for bridging gap. It has good corrosion resistant properties and is particularly suitable for brazing stainless steels also.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 994 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Melting Point875 - 895 Degree C
ShapeRound
Diameter3.15mm
Usage/ApplicationGeneral Fabrication
Model501FC
Surface FinishingFlux Coated

ALFA - 501FC is used for brass brazing steels, malleable cast iron, copper, copper alloys with melting temperatures greater than 950 C, nickel and nickel alloys.It is also known as "Silicon Bronze"

Yes! I am Interested


  • +4
Get Best Quote

Approx. 26,016 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
Tensile Shear Strength40 kg/mm2
Melting Point605 - 710 Degree C
Purity25%
Model207A
Surface FinishingFlux Coated
Daimeter1.60 mm,2.00mm,2.50 mm,3.15 mm

ALFA - 207A FC wide melting range limit its application because it is more prone to liquation. It is recommended for applications with slow heating rates. However, it has good fillet forming properties and has ability to bridge wider gaps

Yes! I am Interested


  • +9
Get Best Quote

Approx. 25,000 / Kg Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Kg
Diameter1.6 mm
MaterialSilver
Size1.60 / 2.00 / 2.50 / 3.15 / 5.00
BrandALFA
Bonding Temperature650 - 750
ColorWhite
Surface FinishingSmooth
Quantity Per PackOne Kilogram
I Deal InNew Only
Country of OriginMade in India

It is a general purpose alloy which has highest joint strength and also provides resistance to corrosion in chlorine, sulphur and steam environments.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 12,079 / Kg Get Latest Price

Product Details:
Diameter3.15mm,2.50mm,2.00mm,1.60mm
Size500M
BrandALFA
ColorBright
Surface FinishingBare
Purity10%

This grade is used for brazing carbide segments. This silver brazing alloy is used to weld copper and brass with ferrous metals. It can be applied in the industries of air-conditioning and valves.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 39,952 / Kg Get Latest Price

Product Brochure
Product Details:
BrandALFA
Melting Point595 - 630 Degree C
Purity40%
Model204FC
Minimum Order Quantity1 Kg
Surface FinishingBare & Flux Coated
Daimeter1.60 mm,2.00mm,2.50 mm,3.15 mm

ALFA - 204FC is versatlie, high strength, free flowing and exhibits lowest melting points.

Yes! I am Interested


REQUEST CALLBACK
  • +1
Get Best Quote

Approx. 1,044 / Kg Get Latest Price

Product Details:
MaterialSilver / Brass
Fuel Gas TypeOxy-Acetylene
BrandALFA
ColorAs required by customer
Country of OriginMade in India

Silver / Brass brazing rods with Flux coated over them

Additional Information:
  • Delivery Time: Ready in stock

Yes! I am Interested


REQUEST CALLBACK
  • +1
Get Best Quote

Approx. 1,100 / Kg Get Latest Price

Product Details:
Fuel Gas TypeOxy-Acetylene
MaterialSilver / Brass
Size500mm
BrandALFA
Country of OriginMade in India

Flux Coated Rods

Additional Information:
  • Delivery Time: Ready in stock

Yes! I am Interested


  • +1
Get Best Quote

Approx. 1,044 / Kg Get Latest Price

Product Brochure
Product Details:
Fuel Gas TypeOxy-Acetylene
BrandALFA
ColorAs required by customer
Country of OriginMade in India

Brass Brazing Rods with Flux coated over them

Additional Information:
  • Delivery Time: Ready in stock

Yes! I am Interested


Get Best Quote

Approx. 25,000 / Kg Get Latest Price

Product Details:
Size500mm
BrandALFA
ColorAs required by customer
Country of OriginMade in India

Silver Brazing Rods with Flux coated over them

Additional Information:
  • Delivery Time: Ready in stock

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Abhinav Jain  (Marketing Head)
Indian Solder And Braze Alloys Private Limited
62-A Delhi road
Navinmandi, Meerut - 250002 , Uttar Pradesh , India
Send E-mail
Share Us:
X