Indian Solder And Braze Alloys Private Limited
Meerut, Uttar Pradesh
GST No. 09AAECI6011Q1Z8
Send E-mail
Call 0794267387870% Response Rate
Home  » Our Products » 

Silver Brazing Rods


Offering you a complete choice of products which include silver brazing 25% rods alfa207a, silver brazing 20% rods alfa202, silver brazing 35% rods afa208, silver brazing 5% flat sticks alfa105, silver brazing 15% rods alfa115 and silver brazing 2% flat sticks alfa102.

  • +3
Get Best Quote

Approx. 19,800 / Kg Get Latest Price

Product Brochure
Product Details:
Size500M
BrandALFA
Surface FinishingFlux Coated
Melting Point605 - 710 Degree C
Model Name/NumberALFA207A 25%
Tensile Strength40 kg/mm2

ALFA - 207A wide melting range limit its application because it is more prone to liquation. It is recommended for applications with slow heating rates. However, it has good fillet forming properties and has ability to bridge wider gaps.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 16,264 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
BrandALFA
Surface FinishingBare
Melting Point620 - 750 Degree C
Model Name/NumberALFA202 20%
Tensile Strength40 kg/mm2

ALFA - 202 is very versatile, high strength, free flowing and exhibits low melting points. It can be used to join a wide range of base metals besides being economical.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 26,871 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
Tensile Shear Strength40 kg/mm2
Surface FinishingBare & Flux Coated
Melting Point607 - 702 Degree C
Model Name/Number208
Purity35%

ALFA - 208 is free flowing and is suitable for general purpose work requiring higher brazing temperature. Its melting range is helpful where joint clearances are not uniform. Unless heating is rapid, care must be taken , that lower melting constituents do not seperate by liquation.

Yes! I am Interested


  • +4
Get Best Quote

Approx. 4,736 / Kg Get Latest Price

Product Brochure
Product Details:
MaterialSilver Brazing Rods
Size500 mm
BrandALFA
Pieces Per Pack1KG
ColorSilver
Model105

ALFA - 105 may be used where very close fits cannot be held. It is best used with the lower joint clearance. It is majorly used in Air conditioning and Refrigeration industry.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 12,729 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
BrandALFA
Surface FinishingBare
Melting Point643 - 802 Degree C
Model Name/NumberALFA115 15%
Minimum Order Quantity1Kg

We are offering ALFA115 15% Silver Brazing Rods.
ALFA - 115 is extremely fluid at brazing temperature. It provides more strength to joint than ALFA105.

Yes! I am Interested


  • +4
Get Best Quote

Approx. 2,465 / Kg Get Latest Price

Product Brochure
Product Details:
MaterialBrazing Products
Size500 mm
BrandALFA
Pieces Per Pack5 Kgs
ColorSilver
Temperature645 - 740
Tensile Strength55 Kg/mm2
Diameter1.30mm X 3.20mm
Model Name/Number102
Purity2%

ALFA - 102 has high fluidity. It has ability to fill gaps at the lower end of its brazing range and is very fluid at high end.

Yes! I am Interested


Get Best Quote

Approx. 32,528 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
BrandALFA
Tensile Shear Strength42 kg/mm2
Surface FinishingBare & Flux Coated
Melting Point615 - 620 Degree C
Model Name/NumberALFA207 43%
Minimum Order Quantity1Kg

ALFA - 207 may be used in brazing operations, requiring a low temperature, quick and complete penetration and neat joints of high strength that needs little or no finishing. It is used where joints are closely fitted and where it is desired to employ a single alloy effective in wide range of applications. It may be used in brazing steel, copper, brass, gunmetal, tin bronzes, aluminium, manganese bronzes, copper nickel alloys and nickel silver.

Yes! I am Interested


Get Best Quote

Approx. 37,478 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
BrandALFA
Tensile Shear Strength43 kg/mm2
Surface FinishingBare & Rods
Melting Point620 - 640 Degree C
Model Name/NumberALFA205 50%

ALFA - 205 is a general purpose alloy which has highest joint strength and also provides resistance to corrosion in chlorine, sulphur and steam environments.

Yes! I am Interested


  • +4
Get Best Quote

Approx. 13,729 / Kg Get Latest Price

Product Brochure
Product Details:
MaterialSilver
Size500mm
BrandALFA
Tensile Shear Strength45 kg/mm2
Melting Point643 - 802 Degree C
Daimeter1.60 mm, 2.00mm, 2.50 mm, 3.15 mm
Model115
Purity15%
Minimum Order Quantity1 Kg


ALFA - 115 is extremely fluid at brazing temperature. It provides more strength to joint than ALFA105

Yes! I am Interested


  • +3
Get Best Quote

Approx. 2,430 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
ColorBright
Tensile Shear Strength55 kg/mm2
Melting Point645 - 740 Degree C
Daimeter3.00mm
Surface FinishingBare
Model102
Purity2%

ALFA - 102 has high fluidity. It has ability to fill gaps at the lower end of its brazing range and is very fluid at high end

Yes! I am Interested


  • +3
Get Best Quote

Approx. 4,736 / Kg Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity10 Kg
Diameter3 mm
MaterialSilver
Size3 mm
Bonding Temperature643-807
ColorRed
Surface FinishingSmooth
Melting Point807
Model Name/NumberALFA105

ALFA - 105 may be used where very close fits cannot be held. It is best used with the lower joint clearance. It is majorly used in Air conditioning and Refrigeration industry.

Additional Information:
  • Delivery Time: 7 days

Yes! I am Interested


  • +3
Get Best Quote

Approx. 2,465 / Kg Get Latest Price

Product Brochure
Product Details:
Size500 mm
BrandALFA
ColorBright
Tensile Shear Strength55 kg/mm2
Melting Point645 - 740 Degree C
Model102
Diameter2.00 mm
Purity2%

ALFA - 102 has high fluidity. It has ability to fill gaps at the lower end of its brazing range and is very fluid at high end.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 2,465 / Kg Get Latest Price

Product Brochure
Product Details:
MaterialBrazing Products
Size500 mm
BrandALFA
ColorBright
Daimeter1.30mm X 3.20mm
Tensile Strength55 Kg/mm2
Quantity Per Pack5 Kg
Surface finishingBright
Tempreture645 - 740
Model102
Purity2%

ALFA - 102 has high fluidity. It has ability to fill gaps at the lower end of its brazing range and is very fluid at high end.

Yes! I am Interested


Get Best Quote

Approx. 30,407 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
BrandALFA
Surface FinishingBare & Flux Coated
Melting Point671 - 775 Degree C
Model Name/NumberALFA404 40N
Tensile Strength50 kg/mm2

ALFA-404 is used for brazing carbide tip brazing. Similar to ALFA-405, but higher brazing temperature is required. It flows freely and does not contain cadmium.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 2,440 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter2.50mm
MaterialBrazing Products
Size500M
BrandALFA
Tensile Shear Strength55 kg/mm2
ColorBright
Surface FinishingBare
Melting Point645 - 740 Degree C
Model Name/Number102
Purity2%

ALFA - 102 has high fluidity. It has ability to fill gaps at the lower end of its brazing range and is very fluid at high end

Yes! I am Interested


  • +3
Get Best Quote

Approx. 4,736 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm
MaterialSilver Brazing Alloys
Size500M
BrandALFA
ColorBright
Tensile Shear Strength55 kg/mm2
Surface FinishingBare Rods
Melting Point643 - 807 Degree C
Model Name/Number105
Purity5%

ALFA - 105 may be used where very close fits cannot be held. It is best used with the lower joint clearance. It is majorly used in Air conditioning and Refrigeration industry.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 4,711 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter2.50mm
MaterialSilver Brazing Alloys
Size500M
BrandALFA
Tensile Shear Strength55 kg/mm2
ColorBright
Melting Point643 - 807 Degree C
Model Name/Number105
Product TypeSilver Brazing Rods
Purity5%

ALFA - 105 may be used where very close fits cannot be held. It is best used with the lower joint clearance. It is majorly used in Air conditioning and Refrigeration industry.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 4,701 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter3 mm
Pieces Per Pack50
MaterialSilver Brazing Alloys
Size500M
BrandALFA
ColorBright
Melting PointSilver Brazing Rods
Model Name/Number105
Tensile Strength55 kg/mm2

ALFA - 105 may be used where very close fits cannot be held. It is best used with the lower joint clearance. It is majorly used in Air conditioning and Refrigeration industry.

Yes! I am Interested


Get Best Quote

Approx. 37,478 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
BrandALFA
Tensile Shear Strength45 kg/mm2
Surface FinishingBare & Flux Coated
Melting Point632 - 688 Degree C
Model Name/Number405 50N

We are offering ALFA405 50N Silver Brazing Rods.
ALFA-405 is particularly suitable for brazing carbide tool tips to tool shanks as it wets the carbide tool tip very satisfactorily. It has a wide wetting range, therefore, the solid and liquid portions do not tend to separate excessively. It is good filler metal for bridging gap. It has good corrosion resistant properties and is particularly suitable for brazing stainless steels also.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 23,336 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
MaterialBrazing Products
Size500M
BrandALFA
Surface FinishingBright
Model Name/NumberALFA203 30%
Quantity Per PackOne Kilogram
Temperature607 - 710
Tensile Strength38 kg/mm2
Product TypeSilver Brazing Alloys

ALFA - 203 is very versatile, high strength and is free flowing. It can be used to join a wide range of base materials.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 41,721 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60mm,2.00mm,2.50mm,3.15mm
MaterialSilver Brazing Rods
Size500M
BrandALFA
ColorSilver
Surface FinishingBright
Model Name/Number311SN
Quantity Per Pack1
Tensile Strength48 kg/mm2
Purity56%

ALFA - 311Sn is a low melting filler metal and does not contain cadmium. It is ideal for furnace brazing. It is used by the dairy and food industry where cadmium free joints are required. This brazing alloy is less prone to cause stress cracking on stainless steel and some nickel alloys. After brazing it gives a closer match with whitish metals such as stainless steel

Yes! I am Interested


REQUEST CALLBACK
  • +3
Get Best Quote

Approx. 9,193 / Kg Get Latest Price

Product Details:
Diameter3.15mm, 2.50mm, 2.00mm, 1.60mm
Size500M
BrandALFA
ColorSilver
Purity10%

This grade is used for brazing carbide segments. This silver brazing alloy is used to weld copper and brass with ferrous metals. It can be applied in the industries of air-conditioning and valves.

Yes! I am Interested


  • +3
Get Best Quote

Approx. 6,750 / Kg Get Latest Price

Product Details:
Minimum Order Quantity1 Kg
MaterialAluminum
ColorFrey
Melting Point385-405
Packaging TypeOne Kilogram
WeightOne Kilogram
Wire Gauge2.00mm
Rod Diameter2.00

ALFA AlZn2 Aluminium Zinc Brazing Rods is the only solution to braze Copper to Aluminium. This brazing rods is particularly used in joining Copper to Aluminium tubes in refrigeration industry.

This aluminum brazing filler metal welds copper alloy and aluminum alloy, and is suitable for transformer, refrigeration industries and other fields.

Additional Information:
  • Production Capacity: Material available in stock
  • Delivery Time: Material available in stock
  • Packaging Details: One Kilogram brazing rods packed in plastic box

Yes! I am Interested


  • +3
Get Best Quote

Approx. 30,407 / Kg Get Latest Price

Product Brochure
Product Details:
Diameter1.60 mm,2.00mm,2.50 mm,3.15 mm
Size500M
BrandALFA
Tensile Shear Strength42 kg/mm2
Surface FinishingBare & Flux Coated
Melting Point595 - 630 Degree C
Model Name/Number204
Minimum Order Quantity1 Kg
Purity40%

ALFA - 204 is versatlie, high strength, free flowing and exhibits lowest melting points

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. 25,000 / Kg Get Latest Price

Product Details:
MaterialSilver
Size500mm
BrandALFA
Surface FinishingSmooth
Country of OriginMade in India

Silver Brazing Rods in all specifications and dimensions

Additional Information:
  • Delivery Time: Ready in stock

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Abhinav Jain  (Marketing Head)
Indian Solder And Braze Alloys Private Limited
62-A Delhi road
Meerut - 250002 , Uttar Pradesh , India
Send E-mail
Share Us:
X